The development of rope-making machines will bring a lot of convenience to people's lives. Ropes are an indispensable thing in people's lives. So how to do it?
The first step is to place it on the level ground, connect the power supply, check whether each transmission is normal, and lubricate each transmission part appropriately. Start the motor and check whether the running direction is consistent with the indicated direction. If it is not consistent, turn off the power and swap the two wires of the capacitor and motor to ensure that it is consistent with the indicated direction.
In the second step, insert an appropriate amount of the prepared straw into the two feeding ports of the machine, through the rope mouth to between the two pulleys.
The third step is to turn on the power, continue the original forage, and continuously input straw to complete production.
Step 4: When the rope coil is full, turn off the power of the rope making machine, cut the straw rope near the wooden disk, remove the wooden disk, remove the straw rope bundle, install the rope disk, and wrap the original rope head It can be re-produced on the wooden tray.
Things to note when using a rope making machine:
1. The equipment must be operated and maintained by dedicated personnel. Operators should read the instruction manual carefully before working and be familiar with the performance and precautions.
2. Adjust the height of the workbench and the pressing roller according to the thickness and cutting amount of the workpiece to be processed.
3. Observe the working condition of the machine tool every time you start it. Pay attention to stopping the vacuum work before the work stops.
4. In order to facilitate maintenance, adjustment and improve work efficiency, this machine has two working states: manual and automatic.
5. Lubricate and maintain machine tools regularly according to certain requirements.
