The strapping machine is often used in our daily life. It is used for strapping and packaging cartons, cloth packages, etc. It brings convenience to production and is loved by everyone. So do you know what the operating specifications of the strapping machine are? Next Let’s take a look with everyone!
Because of its convenient and practical characteristics, the strapping machine can be used in many processing productions. Before use, the machine must be troubleshooted to ensure that there are no problems before it can be used normally. It is strictly prohibited to stand people or stack any objects under the membrane system. The strapping machine turntable should run clockwise. Check whether the fastener of the unmanned baler is firm and loose. Add liquid lubricating oil to the reducer regularly and check whether the oil circuit is smooth.
It is prohibited to test the voltage between the DC motor control board, the PLC input point and the ground. It must be firmly grounded or connected to zero to avoid damage to machines and personnel caused by leakage. Check whether the motor and electrical equipment are dry and whether the insulation is good. Regular inspection and maintenance of electrical and electrical connections and cleaning of electrical cabinets are required. It is strictly prohibited to move or remove the upper and lower fixed limit blocks, and the external power supply must meet the power requirements of the machine. When using, connect the power plug to the power source, press the switch, and the indicator light will turn on. When the two proximity switches sense the tape feeding probe shown, the main motor starts and the machine starts feeding tape.
During operation, do not put your hands near the chain for maintenance or inspection, or perform other operations to prevent hand injury. If there is a problem, turn off the power in time before performing maintenance. When the strapping machine is running, the operator should stand at a certain distance from the turntable. When the machine completes a working process and stops, the operator should then approach the machine to prevent the cargo from falling apart and injuring people. When the strapping machine is moved from its original location, professionals should reinstall and test the machine and make sure it is correct before use. After each use, the power switch or motor switch should be turned off. Perform regular equipment maintenance.
The above are the operating specifications of the strapping machine. I hope the above content can be helpful to everyone. Welcome to call us for consultation!
